Paving bricks are subjected to stresses greater than the bricks for masonry walls and can be covered with water for long periods and must withstand loads due to heavy traffic. It is often used to give finishing touch in terraces, gardens, and various other constructional areas. The choice of brick depends on the area of usage. Properties such as Durability, stability, wear resistance, rolling noise mitigation have made paving bricks more successful. The average dimension for the construction of brick is determined from a sample of 10 randomly selected blocks. These values can differ by more than 0.4 √ s (mm) dimensions provided by the manufacturer (s). The differences between measured minimum and maximum dimensions of the brick lead different shapes of the bricks.

The Paving bricks have a long life due to its high resistance and high volumetric density of the material used for its construction. The brick paving is characterized by low water absorption.The high calcination temperature during the manufacturing process makes the paving bricks stronger. It does not require any special maintenance. When you do äärekivi paigaldus, the gathering of the details is necessary for the people. Different shapes of the curb are available with the people, but the selection of the right one is necessary. It will offer the desired results to the individuals. The maintenance is easy after installation.

Fouling by other trades

To obtain a challenging design in terms of paving bricks, it is necessary to protect the surface by a thick enough cover in order to avoid the contamination. If splashed mortar or paint still occurs they can be eliminated by means of cleaning products available on the market. The paving bricks have High resistance to acids and are not thereby damaged.

Fogging gray surface

Because of the compositionof the raw materials and cooking ceramic used to boast strength of paving bricks color, a gray veil can sometimes form on the surfaceafter installation. In addition to this grey veil soluble saltsin water such as sodium, potassium or magnesium, which is presentin trace amounts in the form of trace elements,can cause contamination but these can easily be rinsed with water.Sometimes, the ballast used is not free of substances capable of efflorescence.

These can be trans-carried naturallythrough the paving bricksdepending ontype of deposit used. The humus, limestone or other constituentscan also lead to dirt-like Crust which can be prevented by ensuring proper surface cover.A whitish deposit sometimes appears on the surface of paving bricks, especially in spring. This is due to the salts that have been spreadingcommon in winter .It is recommended that in such a case, surface can be simply scanned to remove the salt deposit. Hence because of this problem it is recommended to use fine gravel instead of salts.

Due to the routine use of paving bricks, stains from a grill or engine oil may occur. To eliminate this type of fouling, cleaning products are available in specialty stores. These products nor have corrosive effects or impacts on the strength of the color of the brick paving. This kind of dirt usually disappears spontaneously when exposed to natural weather.

Sometimes sand may get deposit on the joints of paving bricks and they are likely to be carried by rain or dynamic load. If this phenomenon occurs in small scale, it will not affect thePavingbricks. However, if the joints are fully dividend even ruptures of may occur. It is therefore recommended to conduct testsregularlyin joints. Thus paving bricks are laid after better planning.