Printing is a necessary attribute of economic activity of enterprises of different ownership forms, it contains information about the name of the legal entity, its legal form of ownership, INN, OGRN, and the name of the authority that conducted registration and place of registration.

On customer request, it can be placed any other information or graphic symbol. See here how the presence of seals is the responsibility of all organizational-legal forms of business, in addition to the organizational forms a sole proprietorship.

Information about potential customers

Manufacturer of seals, stamps, and seals order as at the start of their activities firms and existing enterprises (after making changes in statutory documents). Given the fact that Russia was about 4.6 million businesses and each year, there are several hundred thousand new, this activity can be considered interesting to open own business.

Required equipment

For the business, the organization needs to purchase office equipment (computer and printer), as well as special equipment and materials.

The minimm set of equipment:

  • The exposure chamber, for example, Ultra KS-60, worth about 9.5 thousand rubles;
  • Hot-wardrobe – from 5 thousand rubles (depending on the temperature range and volume), but the equipment at the initial stage you can replace the fan;
  • Automatic washing – from 3 thousand rubles (depending on cycle length and volume), the equipment, in the early stages can be neglected if the rinse cliché manually;

So do you need to purchase supplies that will be used in the manufacture of stamp products:

  • Matte or clear film (media image) A4 – about 15 rubles;
  • Of liquid photopolymer, preferably us firm Ideal (cost about 1000 rubles/kg);
  • border tape roller, the production of M&R (USA) – 370 rubles;
  • protective film type PCF-12 – 1900 rubles;
  • substrate production Chemence – 50 rubles/sheet;
  • the double-sided tape.

These types of materials and equipment may be replaced by others with similar characteristics.

Stages of production

As izgotovlivajut print and what do I need? Consider the most simple, requires minimal investment, technology, photopolymer. The whole process can be divided into several main stages.

Starts the manufacturing of a seal or a stamp layout using the computer and print it on the 3M tape, after which the print is being prepared to be exhibited. Exposure is then performed (using the Ideal polymer and substrate Chemence). Polymer clichés are washed, resulting in an image. The completion of polymerization occurs in the exposure chamber, after which cliché should be dried in the hot-cupboard (or with a fan). The last stage: ready clichés are handled with a pair of scissors or a special clearing, after which is pasted on the snap using double-sided tape. For quality control of products is performed proof.

Summary

For the business organization (manufacturing only the main species of seals and stamps) enough 150-200 Tr (equipment, materials, financing activity before self-sufficiency). A number of personnel: 1 person (owner). The area of 15-20 sq. m. the Average time to become financially sustainable 4 to 6 months, the ROI of 8-12 months.

After payback of the investment, it will be possible for further development, as the transition to more advanced technologies (flash or laser engraving), allowing to produce higher quality seals and stamps with additional protection levels.